SAFETY WARNING: Only use dry on materials that are safe to be worked dry. Contact the material supplier to confirm suitability and check safety data sheets on the material. Always use appropriate PPE when working dry and ensure appropriate dust control measures are in place.
This profiling tool fits on your angle grinder for bullnosing your edges of stone and tile on site. These are a wet or dry (with appropriate PPE please check with your material supplier in regards to proper technique) diamond profiling wheel designed for use on your angle grinder. They have a M14 threaded arbor and have both a top and side bearing so you can get a true shape on all stones. Finishing is required with a diamond pad or similar tool to remove marks and bearing lines.
Ideal for use in marble, travertine, limestone and concrete pavers and tiles.
Will generally cut 50-100 lineal metres depending on material, and if oyu chamfer the stone first (which speeds the process and prolongs the life of the router).
We recommend 4,000RPM operating speed but can be varied to suit the material.
Internal water holes are provided fo ruse on a wet polisher(recommended).
The size stated is for the stone thickness. If the stone is slightly over this dimension, a "step" will show on the bottom edge of the tile. This can be feathered in if needed. Alternatively go up a size, although this will not give an accurate bullnose.
Excellent phone manner and fast delivery
Great products and dast delivery.
Very Efficient & Helpful Service and Swift Delivery
The Operations of Diamach are Very Efficient and Swift