S-Complex™ is a concentrated, next-generation performance additive delivering MASSIVE GAINS IN CUTTING & GRINDING SPEED.
Product Technical Benefits
• MASSIVE gains in cutting and grinding speed – up to 18.75 times the normal cutting speed in real stone fabrication plants.
• INEXPENSIVE use only 0.4% (1:250) concentration up to 0.8% (1.125) concentration to achieve optimum results. The product lasts well in water recycling systems so redosing is also inexpensive.
• Prolongs the life of the diamonds in diamond tools
• Cleaner cuts and a big reduction in chipping and blowouts.
• Faster, cleaner cutting of problematic hard materials including porcelain and sintered stones.
• Significantly lower saw noise levels, especially on hard sintered stone and porcelains.
Product Applications
Honing/polishing of natural stone floors & countertops
Cutting/sawing/grinding of natural stone in fabrication plants
How S-Complex™ optimizes cutting/grinding speed and diamond tool life:
Exploits a physical property called the Rehbinder Effect, softening the substrate ahead of the tool.
Maximizes effective torque at the tool-surface interface while reducing machine torque and tool vibration.
Enables greater depth per cut with increased cutting speeds
With pressure and heat, the additive forms a protective coating around each exposed diamond which minimizes diamond wear and retains sharpness.
Preferentially fills micro-fractures in diamonds as they occur during use, reducing hydraulic pressure inside the cracks and slowing disintegration of the diamonds.
How to Use: Stone / Quartz / Porcelain, Sintered Stone / Glass Fabrication plants:
Add 0.5% to 1% S-Complex™ to your water re-circulation system. We have found 0.5% to work well when only natural stone is being sawn and processed. 0.8% is recommended where a variety of harder man-made materials such as porcelain and sintered stone are being cut and processed as well as natural stone.
S-Complex™ is recycled with your water. S-Complex™ will slowly degrade with multiple usages, is attracted to cuttings, and will be diluted as you add water to replace water that evaporates. Add 0.5 to 0.8% S-Complex™ to your recycled water at regular intervals or constantly dose at very tiny drip levels with a suitable peristaltic dosing pump. Complimentary Products:
M-Protect™ is a release agent which is sprayed onto machinery prior to use and allows easier removal of dried concrete slurry.
M-Clean™ is a high-tech acid wash that enables quick removal of dried concrete slurry from machinery without corrosion to exposed metals.
Safety
There has been a worldwide move toward wet processing of stone due to the dangerous health effects of breathing in silica dust i.e. dust from breaking up the silica content in the stone. In many countries, dry processing of natural stone has been outlawed, except in controlled factory environments with specified extraction/ventilation equipment and strict HR protocols.
S-Complex™ is non-toxic, low odor, and biodegradable.
Precautions
Eye / Face: Wear splash-proof goggles.
Hands: Wear PVC or rubber gloves.
Body: When using large quantities or where heavy contamination is likely, wear coveralls.
Respiratory Where an inhalation risk exists, wear a Type A (Organic vapour) respirator.
Do not take it internally.
Avoid spraying in windy conditions.
Wash hands thoroughly.
First Aid
Eye: If in eyes, hold eyelids apart and flush continuously with running water. Continue flushing until advised to stop by a Poisons Information Centre, a doctor, or for at least 15 minutes.
Inhalation: If inhaled, remove from contaminated area. Apply artificial respiration if not breathing.
Skin: If skin or hair contact occurs, remove contaminated clothing and flush skin and hair with running water. Continue flushing with water until advised to stop by a Poisons Information Centre or a doctor.
Ingestion: If swallowed, do not induce vomiting.
Transport
NOT CLASSIFIED AS A DANGEROUS GOOD BY THE CRITERIA OF THE ADG CODE, IMDG OR IATA
Pack Sizes
5L (1.3G); 20L (5.3G); 200L (53G); 1000L (264G) – for factory / OEM only.
Shelf Life and Storage Guidelines
Best within 3 years of manufacture date.
Keep container tightly sealed, in a well-ventilated place, at 36 – 1000 Fahrenheit of 2 – 380 Celsius
Technical Data
Specific Gravity: 1.04
Colour: Clear colourless to light straw yellow liquid
Weight: 5L (1.3G) = 5.5Kg (12.1Lb), 20L (5.3G) = 21.4Kg (47Lb, 200L (53G) = 56.5Kg ( 24Lb) incl. pallet
VOCs: 343g/L (using EPA method 24)
Country of Manufacture
Australia
Excellent phone manner and fast delivery
Great products and dast delivery.
Very Efficient & Helpful Service and Swift Delivery
The Operations of Diamach are Very Efficient and Swift