MITEQ Sealer 102 Color Enhancer - 5 litre
Sealer 102 Colour Enhancer
Sealer 102 Colour Enhancer is an water based, high level stain protecting, sub-surface sealer designed to enhance all types of substrates. The sealer provides excellent stain resistance against most stains such as oil, coffee, wine, grease and other material.
It can be used on a wide variety of substrates including marble, concrete, bluestone, polished concrete, sandstone and a comprehensive range of natural and man made stones.
The sealer is non film forming & penetrating in nature, providing a “wet look” or colour enhancing effect to most masonry surfaces without significantly affecting surface texture and vapour permeability.
Available in 5 & 20 Litre containers.
Directions for use
A two coat application, wet on wet, will give sufficient protection provided application guidelines are met.
Power wash surfaces to be treated.
Remove stains caused by oil, grease and soils with the recommended Miteq cleaner.
Surface may be damp, but excess water must be removed from the surface prior to application.
Apply using a brush, roller or low pressure spray. Do not apply excessively or allow the sealer to pool on the surface.
Always test a small area prior to commencement to ascertain the effect of the sealer on the surface.
Do not use above 30°C or below 10°C or if rain is imminent.
Use material directly from container. Do not dilute.
The sealed surface will be suitable for foot traffic after 24 hours.
Do not wash down for 48 hours following application.
Coverage will depend on surface porosity. 5-6m2/litre on very porous surfaces and 8-10m2/litre on dense surfaces as a guide.
Shelf Life - 12 months in unopened containers.
Read all warnings.