ACTICHEM Intense Hybrid Semi Penetrating Sealer 15 Litre AP90915
Intense Hybrid
High penetration enhancing sealer for porous stone
Product Description
Intense Hybrid is high penetration enhancing sealer for porous stone.
Intense Hybrid is a premium quality sealer which enhances and enriches the natural colour and beauty of porous stone types, whilst imparting outstanding stain protection and water repellency. Intense Hybrid beautifies and enriches the natural colouring found in stone by making the stone more light absorbent. The more light that is absorbed by the stone, the darker it will appear to the naked eye. Whilst the body of the substrate is darkened, the higher density minerals and exposed aggregates are brightened which lifts the appearance of the whole area.
Intense Hybrid is a unique formula because it is both a penetrating sealer and a topical sealer. On a porous surface such as sawn granite, 1 application will act exactly as a penetrating sealer, if subsequent applications are applied, they will form an extremely durable topical film.
Sealant
Stone & grout
pH
Solvent
Dilution
Ready to use
Fragrance
Solvent
Safety
Class 3 Flammable
Colour
Clear
Pack Size
5lt, 15lt, 500ml
Surfaces
Natural Stone, Concrete & Masonry
Product Code
AP909
Additional Information
Benefits
Advanced Chemistry: Intense Hybrid is formulated using a precise blend of “nano – small particle” technology which chemically reacts and bonds to the stone structure forming a long lasting, repellent shield.
Enriching Sealer: Alters the stones ability to absorb light, which enhances natural veins and features, drawing attention to the stone’s inherent beauty.
Conceals: Intense Hybrid helps conceal scratches and imperfections.
Premium Protection: Intense Hybrid provides premium protection against water and oil borne contaminants including; food and beverage stains, oil & greasy spills, biological growth such as mould & mildew, efflorescence, pollution and weathering.
Intense Hybrid is also easy to apply and fast curing.
Application areas and surface suitability
Intense Hybrid is well suited to dense stone types and concrete. Intense Hybrid includes high performance penetrating agents which give it greater ability to penetrate small pores, penetrate to greater depths and enables easier application.
Expected Wear:
Intense Hybrid will provide premium protection for up to 7 years and in many applications, several years longer. However application methods, weather conditions, traffic, harsh cleaning methods and substrate type will affect wear. Avoid use of solvents, strong acids and strong alkalis for extended sealer life.
It is recommended that the sealer be re-applied every 3 – 5 years where harsh conditions exist.
Considerations:
Not to be used as a sub-terrain waterproofing. Should not be applied if temperature is above 32 degrees or if rain is expected within 24 hours of application. If rain has preceded the application, the surface should be allowed 24 hours to dry completely.
How to use
Read and understand the SDS before use.
Always pre-test in an inconspicuous location for substrate sensitivity to chemicals.
Preparation:
New installations must be fully cured before application of Intense (Min 48 hours)
Existing stone, tile and grout must be totally clean, dry and chemical free.
Coverage is 8 to 14m2 / Litre per coat. The coverage for the 2nd application is typically double.
Dilutions
Ready to use (do not dilute)
Application
Apply 1 to 2 applications of Intense Hybrid by generously saturating the surface using a polish applicator, or roller to an area which can be easily reached. (Approximately 15m2).
Ensure even coverage.
Use a clean polish applicator or microfibre mop to ensure that the product is spread evenly and that no pools of sealer remain.
The surface must be shiny wet with a liquid film for at least 1 minute. For very porous substrates more sealer may need to be applied.
If a second coat is to be applied, wait 1 to 2 hours, and repeat the process. The second application can be applied days later.
Using absorbent toweling or applicator, wipe off any sealer remaining on the surface after 10 minutes of the last application. Moisten the towel with Xylene to remove thicker residues which have dried on the surface.
Allow 6 hours before returning area to traffic. Keep dry for 24 hours. Achieves a full cure in 24-48 hours.
Excellent phone manner and fast delivery
Great products and dast delivery.
Very Efficient & Helpful Service and Swift Delivery
The Operations of Diamach are Very Efficient and Swift