MITEQ Surface Sealer 202 - 20 Litre
Surface Sealer 202
Premium, solvent based, acrylic surface sealer for masonry, concrete, pressed pavers and reconstituted stone.
Sealer 202 is a “wet look” surface sealer designed to deliver the maximum protection possible by this type of sealer. It has maximum UV stability making it the most durable in the Miteq range.
Available in 4 & 20 Litre containers.
Directions for use
Power wash surfaces to be treated.
Remove oil, grease and soil stains with the recommended Miteq cleaner.
Ensure surface is completely dry prior to sealing.
Use material directly from can. Do not dilute.
Always test a small area prior to commencement to ascertain the effect of the sealer on the surface.
Apply sealer to the prepared surface by brush, solvent resistant roller or low pressure spray.
Apply evenly, do not allow sealer to pool.
Recoat after six hours or when the first coat is firm enough for foot traffic.
The sealed surface will be suitable for use after 24 hours.
Do not use above 30°C or below 10°C or if rain is imminent.
Sealer 202 is available in gloss, matt and non-slip finish.
Sealer 202 is solvent sensitive, which means it can be re-applied at any time following initial application providing the surface has been suitably cleaned and loose material has been removed.
Allow 3-4m2/litre per coat on porous substrates and 8-10m2/litre on dense substrates. Coverage will depend on surface porosity and substrate type.
Shelf Life 12 months in unopened containers.
Read all warnings.